- Expert Roofing Contractors in Leicester
The edges and ridges of your roof are where wind and weather push hardest. Our modern dry verge and dry ridge systems lock them down securely across Leicester, Loughborough, Hinckley and the wider county.
Few parts of a roof work as hard as its edges and ridge line. They sit right in the path of the wind, and they are the first to feel the strain when a storm rolls in. For generations these areas were held in place with mortar alone, and while mortar does the job for a while, it does not last forever, it dries out, cracks and eventually lets go, leaving tiles loose and exposed. Leicester Roofing Contractors fits modern dry verge and dry ridge systems across Leicester and the surrounding county, holding your roof edges and ridges firmly in place without relying on mortar that is destined to fail.
The verge is the edge of the roof at the gable end, where the tiles meet the sky along the side of the property. Traditionally these were bedded in mortar, which weathers and drops away over time, allowing wind to get under the tiles and lift them. A dry verge system replaces that mortar with interlocking caps that clip neatly over the edge tiles and screw down securely, giving a clean, uniform finish that grips the tiles tight and shrugs off the wind for good.
The ridge runs along the very top of the roof, where the two slopes meet, and the ridge tiles that cap it have the same old weakness. Mortar-bedded ridge tiles work loose as the mortar ages, and a loose ridge tile is both a leak waiting to happen and a genuine hazard if it slips. A dry ridge system fixes each ridge tile down mechanically onto a batten, with a ventilated roll beneath that also lets the roof breathe, so the ridge stays secure and the roof space stays healthier.
We are happy to fit dry verge and dry ridge to an existing roof or as part of a re-roof, and we will give you a straight view on whether your current mortar has more life left or is ready for replacing. Because these areas run along the highest and outermost parts of the roof, we can survey them by drone first to show you exactly what state they are in. As a local company earning its name across Leicestershire, giving honest advice and fitting systems that last is how we intend to build it.
If your ridge tiles have started to work loose or your verges are shedding their mortar, it is well worth getting them sorted before a tile comes down. Ring Leicester Roofing Contractors on 07398 554104, or ask for your free quote online. We will find a time that suits you, take a proper look at your roof edges and ridge, and give you a clear, no-obligation price.
Whether you want to put an end to crumbling mortar along a gable, secure a ridge full of loose tiles, or add dry systems as part of a wider re-roof, our team has it covered. It is precise work along the most exposed lines of the roof, and we fit it to stay put. Here is a look at the dry verge and ridge work we regularly carry out for properties across Leicester and Leicestershire.
Whatever state your roof edges and ridge are in, we will make them secure and weathertight again. Get in touch today to talk it over and book your free quote across Leicester and beyond.
The edges and ridge of a roof are exposed, exacting work, and getting them right makes a real difference to how well the whole roof holds up. At Leicester Roofing Contractors, we fit dry verge and dry ridge systems with care and precision, so your roof stays secure along the very lines where it is tested hardest.
Mortar along verges and ridges always gives way eventually. By switching to modern dry systems, we free you from the endless cycle of cracking, dropping mortar and the loose tiles that come with it.
Every cap and ridge tile is mechanically fixed rather than simply bedded, so it holds firm through wind and storm. That means fewer slipped tiles, fewer leaks and far less to worry about when the weather turns.
The ventilated roll beneath a dry ridge does more than hold tiles down, it lets air move through the roof space, helping to keep condensation and damp at bay and your roof healthier overall.
As well as being more secure, dry systems give the edges and ridge of your roof a tidy, uniform look, and the work is backed by our workmanship guarantee, with clear pricing and no hidden extras.
Whether you would like to know more about any of our services, or you are ready for a quote on a repair or a brand new roof, our friendly team is only a call or message away. We are always happy to talk things through, answer your questions and help you settle on the right approach for your property, with no pressure and no obligation.
Wherever your property sits in the county, our team is close by and ready to help secure your roof edges and ridge. We fit dry verge and dry ridge systems for homeowners and businesses right across Leicester and the surrounding towns and villages. Get in touch to arrange your free assessment and quote.
Thinking about dry verge or ridge work and want a few things cleared up first? Below are the questions we are asked most often about our dry verge and ridge tile work in Leicester and across Leicestershire. If there is anything else you would like to know, our friendly team is always glad to help.
A dry verge system is a set of interlocking caps that fit over the tiles at the gable edge of your roof and screw down securely, replacing the old mortar that used to hold those tiles in place. It grips the edge tiles firmly, gives a neat, uniform finish, and does away with the cracking and crumbling that mortar suffers over time.
A dry ridge system fixes each ridge tile down mechanically onto a batten rather than bedding it in mortar, with a ventilated roll running underneath. This holds the ridge tiles securely in all weathers and allows air to move through the roof space, which helps prevent condensation and keeps the roof healthier.
Mortar starts to break down almost from the day it is laid. As it dries out and weathers it cracks and drops away, leaving verge and ridge tiles loose and free to be lifted by the wind or slip off entirely. Dry systems avoid all of that by fixing the tiles down mechanically, so they stay put for the long term.
They can be. A loose ridge tile is both a potential leak and a safety risk, as a tile that works free can eventually slip and fall. If you have noticed loose or slipped ridge tiles, it is well worth having them looked at promptly, and a dry ridge system is a lasting way to make sure it does not happen again.
Yes. While these systems are often fitted as part of a re-roof, they can equally be added to an existing roof to replace failing mortar and secure the edges and ridge. We will assess your roof and let you know honestly whether your current mortar has life left or is ready to be replaced.
It could not be simpler. Give us a call on 07398 554104 or fill in our online form, and we will arrange a convenient time to inspect your roof and provide a clear, no-obligation quote for the work.